GENERAL TERMS OF PURCASING AND (SUB) CONTRACTING CONDITIONS

of Ambtman Marine B.V. in Groningen, The Netherlands, filed at the Chamber of Commerce in Groningen, The Netherlands, under number 630 241 95

GENERAL

article 1: Applicability

  • The Client is the natural or legal person using these General Terms of Purchasing and (Sub)Contracting. The other party shall be referred to as the Contractor. In these General Terms, ‘work’ shall also include the execution of Services.
  • Articles 1 to 16, inclusive, of these General Terms shall be applicable to all offers made to the Client and all agreements concluded with the Client and to all agreements that may result therefrom. If the offers or the agreements concluded also or exclusively concern
    (sub)contracting and/or execution of Services, articles 17 to 22,
    inclusive, of these General Terms shall apply as well.
  • Any deviations from these General Terms of Purchasing and (Sub)Contracting shall only apply if the Client has provided the
    Contractor with written confirmation of these.
  • In the event of any conflicts between the contents of the agreement concluded between the Client and the Contractor on the one hand and these Terms & Conditions on the other, the provisions set out in the agreement shall take precedence.

 

article 2: Costs related to offers

The Client shall not reimburse any costs made in connection with
offers or quotations, also including the costs of advice, drawings etc. made by, or on behalf of, the Contractor.

 

article 3: Delivery date and penalty

  • Agreed upon delivery time and/work period are deemed final deadlines. If the Contractor exceeds the delivery time and/or work period, the Contractor shall be deemed to be in default. As soon as the Contractor has reasons to suspect that he will not be able to deliver, to deliver on time or to deliver duly, he shall inform the Client immediately.
  • The Contractor shall be liable for any damage and/or loss
    incurred as a result of a delay in delivery and/or work period as meant in article 3.1.
  • For each day of delay in delivery the Contractor is liable to pay the Client a penalty, payable on demand, of 1% of the agreed purchase order with a minimum of € 500,- up to a maximum of 25% of the agreed purchase order.

3.4      The penalty referred to in article 3.3. may be claimed in addition to compensatory and complementary damages by virtue of the law. The Client is entitled to set off this penalty and/or these damages against the amounts owed to the Contractor.

article 4: Prices

  • The prices referred to in the offer are based on delivery Free Domicile at the agreed place of delivery, “Delivered Duty Paid”, in accordance with Incoterms 2010. All prices are firm, fixed, net of all duties and taxes and include adequate packaging.
  • Any increase in prices shall be borne by the Contractor, even after the agreement has been concluded.
    This applies regardless of the period elapsed between the date the agreement was concluded and its execution.
article 5: Transmission of risk
  • Delivery of the Products shall be made Free Domicile at the agreed place of delivery, “Delivered Duty Paid”, in accordance with Incoterms 2010.
  • If delivery “ex works” has been agreed upon and nevertheless the Contractor either transports or arranges for transport, the risk for loading and transport shall be borne by the Contractor.
  • If the Products are collected on behalf of the Client, the
    Contractor has to assist the Client with the loading free of charge.
article 5: Inspection and testing
  • The Client, its principal and the Board of Directors of the work site shall at all times be entitled to inspect or test the Products ordered and/or delivered and the work and/or work in progress. In that case, the Contractor shall arrange for any facilities which may reasonably be required in connection with this.
  • The costs of the testing referred to in article 6.1 shall be borne by the Contractor, in the event that the Client and/or its
    principal and/or the Board of Directors of the work site rejects these Products/the work. Inspection or approval shall not
    release the Contractor from any warranty or liability arising
    under these General Terms of Purchasing, the agreement or the law.

 

article 7: Rejection
  • If the Products/the work delivered by the Contractor do not meet the requirements set in the order and/or the specification, the Contractor shall be entitled to reject these.
    Taking delivery or payment of the Products and/or the work does not imply approval thereof. Despite approval of the
    Products/the work, the costs and risks shall remain the
    Contractor’s responsibility.
  • Should the Client reject delivered Products and/or the work, the Contractor shall within a period determined by the Client;
  • repair the Products/the work free of charge or, at Client’s discretion;
  • replace the Products free of charge and/or carry out (or have carried out) the work in accordance with the

7.3      If the Contractor does not, not within the set period, or not to the Client’s satisfaction, meet its obligation referred to in article 7.2, the Client shall be entitled to carry out the activities
referred to in article 7.2 by itself or to arrange repairs by a third party, at the Contractor’s expense.
The Client shall be entitled to set off the costs incurred against the amounts owed to the Contractor.

article 8: Intellectual property rights

  • ‘Intellectual Property Rights’ are understood to include
    copyrights, database rights, industrial design rights,
    trademarks, patents, as well as the right to obtain these rights through petition, deposit, registration or any other means.
  • ‘Intellectual Property Rights to the Work’ are all Intellectual Property Rights to the work, to the Products and to the
    resources such as drawings, models, moulds and equipment, formed during or for the execution of the agreement between Contractor and Client.
  • All Intellectual Property Rights to the Work belong to the Client. The Contractor hereby nunc pro tunc transfers these rights
    insofar as possible to the Client and at first request of the
    Client the Contractor will without any delay carry out any
    additional actions required for said transfer.
  • For the (transfer of) Intellectual Property Rights to the Work, the Client owes no compensation to the Contractor.
  • The Contractor relinquishes its (moral) rights mentioned in
    article 25 clause 1 subsection a of the Copyrights Act.
    Insofar as changes in the work, the products or their name are concerned, the Contractor also relinquishes its (moral) rights mentioned in article 25 clause 1 subsections b and c of the Copyrights Act. The Contractor will not appeal to the power(s) granted in article 25 clause 4 of the Copyrights Act.
  • The Contractor guarantees that the products to be delivered by him, the work to be performed by him and the Intellectual
    Property Rights to the Work do not infringe any Third party rights, Intellectual Property Rights included, and safeguards the Client against all relevant claims.
    The Contractor will reimburse the Client for all damages as a result of any infringement.

article 9: Confidentiality

  • All Confidential Information which means and includes all
    information, documents, drawings, know-how, and knowledge etc. disclosed by the Client in whatever form to the Contractor, shall be kept secret and confidential and shall not be disclosed to others or used by the Contractor for any purpose other than for the purpose of executing his respective contractual
  • The Confidential Information as meant in article 9.1 shall not be disclosed, directly or indirectly to any third party, without the
    express written consent of the Client. If for the execution of the agreement the Contractor needs to disclose the Confidential Information to its employees, the Contractor is obliged to bind its employees to the same confidentiality obligations as
    stipulated in this agreement, before the Confidential
    Information is disclosed to them.
  • If the Contractor has to disclose the Confidential Information as meant in article 9.1 to any third party (parties) in connection with the execution of his contractual obligations, he shall also bind such party (parties) to the same confidential obligations as stipulated in this article.
  • The Contractor shall owe the Client a penalty payable on
    demand to the amount of 50% of the total order sum with a minimum of € 000,-, if it violates one or more of the
    aforementioned obligations.

9.5      The penalty referred to in article 9.4 may be claimed in addition to compensatory and complementary damages by virtue of the law. The Client shall be entitled to set off this penalty and or these damages against the amounts owed to the Contractor.
article 10: Non-competition

Without the express written consent of the Client, the Contractor shall completely refrain from quotations and/or offers to the principal relating to the work, whether directly or via mediation by any third parties.

article 11: Appliances

  • All appliances such as drawings, models, moulds, matrices and tools which Client puts at the disposal of the Contractor for the purpose of executing its respective contractual obligations shall remain or shall become under all circumstances the property of the Client. This also applies to the appliances, which
    Contractor especially made within the framework of the
    agreement irrespective of whether costs are charged to the
    Client for their production.
  • All resources and all copies made of these must be made available to the Client or returned to the Client upon its first
  • At Client’s demand the appliances have to be clearly and
    indelibly marked as the property of the Client.
    The Contractor shall indicate the Client’s ownership of these appliances to any third party that may wish to seize them.
  • Notwithstanding the stipulations in article 9 the Contractor shall not use the appliances for any purpose other than the
    performance of his contractual obligations.
    The Contractor shall not reveal the appliances to third parties without Client’s express written permission.
    The Contractor shall bear the risk of loss of and/or damages to the appliances and shall at his own expense insure the
    appliances against these risks.


article 12: Liability

12.1.    The Contractor is fully liable for all direct and consequential losses, which may arise as a result of an attributable
shortcoming or wrongful act of the Contractor, its staff or
auxiliary persons. This also includes any loss arising as a result of the presence, use, delivery or removal of the property of the Contractor, its staff or other persons engaged by the
Contractor in the execution of the order.

12.2.    The Contractor shall fully indemnify the Client against
third-party claims for loss compensation as meant in the first paragraph.

article 13: Insurance

The Contractor shall prove to the Client, upon its request and to the Clients satisfaction, that the Contractor has arranged, at its own
expense, adequate insurance for any loss the Client might sustain as a result of acts or omissions of the Contractor and/or any third parties used.

article 14: Warranty
14.1.                                    The Contractor gives warranty that all Products/the work provided by
the Contractor comply with the agreement, be free from any faults or
defects with respect to material, design and manufacturing for a period
of 18 months after the Products/the work have been put into
use or to a maximum of 24 months from the date of delivery.
14.2.                                    The Client shall repair all defects in the Products/the work which
become apparent during the warranty period immediately and in
consultation with the Client, or, at the Client’s discretion, else replace
the defective Products, work or parts of the work.
14.3.                                    All Costs in connection with the repair or the replacement of the
Products/the work shall be borne by the Contractor.
Those costs include inter alia the costs for returning the Products/the
work to operation after the aforementioned repair or replacement.
If the Products/the work form part of a larger object, the costs in
connection with returning said object to operation will also be born by
the Contractor.
14.4.                                    In case the Contractor does not fulfil his responsibilities as agreed
within this article, the Client is entitled to rework or to subcontract the
rework in order to fulfil the Contractor’s warranty responsibilities at the
Contractor’s risk and expense. The Client shall be entitled to set off
the costs incurred against the amounts owed to the Contractor.

article 15: Payment
15.1.                 Payment will be effected within the agreed term of payment as
much as possible, unless the Client has a complaint after
taking delivery of the Products – including the corresponding
documents – with regard to the quantity and/or quality of the
consignment or if the consignment is rejected.
15.2.                 In the event of advance payment or periodic payment, the
Client shall be entitled to demand a sufficient guarantee for
delivery at Client’s discretion.
If the Contractor does not provide this within the set period, it
shall immediately be in default.
The Client shall in that case be entitled to rescind the
agreement and to recover its losses from the Contractor.
15.3.                 The Client shall be entitled at all times to offset any amounts
the parties may have to claim from each other.
15.4.                 The Client reserves the right to pay the Contractor the social
security contributions and wage tax owed by the Contractor
with respect to the work, for which the Client is jointly and
severally liable pursuant to the Wages and Salaries and Social
Security Contributions (Liability of Subcontractors) Act, by
payment into its blocked account as referred to in the Wages
and Salaries and Social Security Contributions (Liability of
Subcontractors) Act, or into the deposit held for the Contractor
by the Tax Collectors Office.

15.5.                 Without prejudice to the provisions of the previous paragraph,
the Client shall at all times be entitled to deduct the social
security contributions and wage tax amounts referred to above
from the (sub)contract sum and to pay these directly to the Tax
Collectors Office on behalf of the contractor.

article 16: Applicable law and choice of forum
16.1                  The law of the Netherlands is applicable.
16.2                  The Vienna Convention on Contracts for the International Sale
of Products (CIGS) is not applicable, nor is any other
international regulation the exclusion of which is permissible.
16.3                  Only the Dutch civil court that has jurisdiction in the place of
establishment of the Client may take cognisance of disputes,
unless this would be contrary to peremptory law.
The Client may deviate from this rule of jurisdiction and apply
the statutory rules governing jurisdiction.
The parties may agree a different form of dispute resolution
such as arbitration or mediation.

(SUB)CONTRACTING/SERVICES

article 17: Prohibition on Assignment/Pledging

The Contractor shall be prohibited from assigning, pledging or
transferring under any title whatsoever, the ownership of the social
security contributions and wage tax due, included in the contract sum, for which the Client is liable pursuant to the Wages and Salaries and Social Security Contributions (Liability of Subcontractors) Act.

article 18: Contractor’s obligations

18.1    The Contractor is obliged to:

  1. have a valid declaration of registration from the relevant
    Employee Insurance Schemes Administration Office (UWV), in so far as this is provided by the Office. The Contractor is obliged to show this registration form at the Client’s request;
  2. at the request of the Client, provide the Client with a recent
    extract (no older than three months) from the Trade Register of the Chamber of Commerce;
  3. hand over to the Client a list of all employees to be employed for the work, as well as hand over once only for each
    employee(before the employee commences work) a copy of valid proof of identity and, upon request, payroll records;
  4. hand over to the Client a man-days register, which states for each employee the name, social security number, address, domicile, date of birth and number of hours worked and on which date;
  5. strictly comply with all obligations regarding the employees
    employed by the Contractor;
  6. strictly perform all statutory obligations with respect to the
    payment of social security contributions and wage tax related to the work assigned to it and, furthermore, to strictly observe the applicable Collective Labour Agreement;
  7. automatically provide a periodic statement with respect to its payment of wage tax and social security contributions, as
    referred to in the guideline(s) established within the framework of the Wages and Salaries and Social Security Contributions (Liability of Subcontractors) Act;
  8. at the request of the Client, prepare weekly reports according to a model approved by the Client and to offer the weekly
    reports, completed and signed, to the Client every week for its approval;
  9. if the Wages and Salaries and Social Security Contributions (Liability of Subcontractors) Act is applicable, set up its
    administration in such a way the following information can be instantly retrieved:

–    the agreement or the content of the agreement on the
basis Contractor has performed the Work;

–    the data/information concerning the fulfilment of the
obligations under the agreement including a registration of
the persons engaged and the days/hours during which
those persons have carried out the work;

–    the payments made under the agreement.

  1. to provide the Client, upon request, with all information for its own administration or the administration of its principal;
  2. if the Wages and Salaries and Social Security Contributions (Liability of Subcontractors) Act is applicable, have at its
    disposal the original escrow account agreement and to show this at the Client’s request, unless parties have agreed that the Client shall deposit directly into the deposit held for the
    Contractor by the Tax Collectors Office.

18.2    In case the Contractor has not, or not yet, complied with its
obligations of paragraph 1, the Client shall only be obliged to make any payment after it has received the missing data and has processed these administratively, and/or the Contractor has complied with any of its other obligations.

article 19: Organisation of the work

  • The Contractor shall be obliged to exclusively observe the
    Client’s directions and instructions.
  • The Client shall be authorised to deny the Contractor’s
    employees access to the work or to arrange for their removal, on account of unsuitability, disorderly conduct, misconduct etc., without reimbursement of any damages / costs the Contractor may encounter as a result thereof.
  • The work and break times at the work site and the rest days or public holidays, vacations or other days off recognised
    generally or at the location of the work site, or prescribed by public authorities or pursuant to any Collective Labour
    Agreement, shall also apply to the Contractor and its
    employees who execute work at the work site.
    It shall not be possible for the Contractor to recover any losses arising from this from the Client. The latter shall also apply if the Contractor’s services cannot be used on account of a strike or other causes evident at the Client or at third parties;
  • Unless agreed otherwise, the Contractor is obliged to ensure, from commencement to completion of the work, that there is a regular foreman at the work site, with whom it shall be possible to make both organisational and technical arrangements.
    His name must be known to the persons or institutions designated by the Client.
  • The Contractor should provide its employees with the correct means of personal protection and to supervise their (correct) use. Any costs arising from this shall be borne by the
  • Any required insurance as well as the excess of any CAR
    policy which may have be taken out with respect to the work site, shall be at the Contractor’s expense.
  • The Contractor should arrange for such manpower that the
    execution of the work is completely adjusted to the planning established by the Client and that other work does not come to a halt. If the Client alters the planning/progress in the work, the Contractor shall be obliged to adjust itself to this.
    Manpower changes shall only be permitted following the
    Client’s approval.
  • As prescribed by the Motor Insurance Liability Act (WAM), the Contractor shall be obliged to ensure that the working materials subject to the WAM supplied by it are insured.
    With respect to the working materials subject to the WAM which are rented by the Contractor, it should be proven to the Contractor’s satisfaction that these materials meet the
    aforementioned insurance requirements.
    Furthermore, the Contractor is obliged to have an adequate
    insurance for the working risks of the working materials subject to the WAM supplied by it.
  • With respect to cables, pipes and other overground and
    subterranean property of third parties, the Contractor shall at all times continue to be obliged to arrange for the determination of their location. The Contractor should inform the Client
    immediately about any damage.
  • Any required materials such as scaffolding, hydraulic platforms, hoisting materials and small materials, including hand tools, measuring equipment, mobile scaffolding, ladders and
    stepladders etc., shall be arranged by the Contractor and
    included in the total price.
  • If work has to be done on, or to, parts of the work site which have already been completed, such as plastered walls, tiling, paintwork etc., the Contractor should take protective measures in order to prevent damage and/or soiling.
    Any damage and/or soiling which is detected during or after the work, shall be deemed to have been caused by the
  • On completion of the work, the Contractor should deliver the work broom clean and leave behind a clean work site.

article 20: Invoicing

  • Notwithstanding the provisions of article 18.2, the Client shall only approve an invoice for payment provided the work, or the part to which the instalment pertains, has been completed to the Contractor’s satisfaction and provided the invoice meets the formal requirements as set out in article 20.2.
  • The invoice should meet the statutory requirements set forth in the Turnover Act. The Contractor should at any rate state the following details clearly and in an orderly fashion:
  1. the date of issue of the invoice;
  2. a consecutive invoice number;
  1. the Client’s name and address;
  2. the Contractor’s name and address;
  3. the number of the agreement;
  4. the work site and the location(s) at which work has been
    executed, to which the invoice pertains;
  5. the period and the execution to which the invoice pertains;
  6. the amount of man-hours worked, the amount of labour costs and (separately) the percentage of wage taxes contained in the labour costs, if the Wages and Salaries and Social Security Contributions (Liability of Subcontractors) Act is applicable;
  7. a statement of the turnover tax or the transfer arrangements with respect to it, if this is not applicable, and in the latter case, the amount of turnover tax;
  8. a statement of the VAT identification number of the Contractor;
  9. a statement of the VAT identification number of the Client, if the VAT payment has been transferred to the Client;
  10. an indication of the invoice amounts, split according to tax rate and subsequently subdivided into unit prices and any discount applied.

article 21: Statutes and regulations

  • The Contractor shall comply with all statutory and other
    regulations, terms and provisions which are applicable to the work pursuant to the contracting agreement concluded by the Client with its client.
  • The Contractor shall itself and at its own costs procure any
    permits and safety measures in connection with the work.

article 22: Execution by third parties

  • Without prior written permission from the Client, the Contractor is not allowed to transfer or subcontract the order or any part of it, or the execution of it to another party.
  • If the Contractor, after having obtained permission, assigns the work or any part of it, to a third party, it is obliged to
    immediately draw up a written agreement with respect to this. The terms of that agreement should correspond with the
    agreement concluded for the work between the Contractor and the Client, at which the Contractor and the third party mutatis mutandis take the legal position of respectively the Client and the Contractor.
  • Transfer/subcontracting shall not affect the Contractor’s
    obligations under the agreement with the Client.
  • Without prejudice to the provisions in articles 22.1, 22.2 and 22.3, the Contractor shall not be authorised to use the
    employees made available to it, until after the Client’s prior
    written permission. In the event that the work is subcontracted, or workers are hired in, as referred to above, the Contractor shall be obliged to comply with the administrative regulations of the ‘Uitvoeringsregeling inleners – keten – en opdrachtgeversaansprakelijkheid 2004’.

These conditions are a full translation of the Dutch version of our
‘General Terms of Purchasing and (Sub)Contracting Conditions’;
explanation and interpretation of the text of these Conditions shall be based on the Dutch text.